T-screwdriver

This is the T-screwdriver that most tools on opening cellphone, specially when the phone have a t-screw locked. unlike the other unit, Nokia is most t-screw user.

Note:
never use none T-crew on Nokia phone.

Read more »

TESTER

This is one of the most important tools for repairing, like on Electronic Repair, tester is the way to analyze the Circuit if it is short of low on contact. Electronic test equipment (sometimes called "testgear" or "bench top") is used to create signals and capture responses from electronic Devices Under Test (DUTs). In this way, the proper operation of the DUT can be proven or faults in the device can be traced and repaired. Use of electronic test equipment is essential to any serious work on electronics systems.

There are two kinds of Tester, the one is Digital and the One is Analog.


Analog Tester:

this is the image of analog tester with two short wired conect with two color the red indicate on positive (+) and the red for negative (-)











Digital Tester:

like in the analog, it has also two short wire with red (+) and black (-) connected but this is different on reading visual image.

Read more »

COMPUTER

Computer is one of the very most important tools on repairing cellphone because it was almost 80% on cellphone is computer base system witch it mean that you can't go further on repairing if you have not one.

COMPUTER - A device that computes, especially a programmable electronic machine that performs high-speed mathematical or logical operations or that assembles, stores, correlates, or otherwise processes information. One who computes.

Read more »

Gadget Box For Phone

There are lots of Gadget released on the market today, gadget that can use to re-format or re-program all kinds of Phone. but the problem is how can you provide all of this stuff. So now.. i can teach or guide you through your choice for much less expensive and really useful on your starting Lesson.
Tips of Choice:

1. First is to identify what brand is very high demand on your country. here in our country (Philippines) Most popular phone are Nokia, CHina phones, Samsung, SE, Etc...
so we focus first on nokia for tutorial.
2. So Nokia is very popular today here in our place so that we are focusing on Nokia's Tools Software ang Box Gadget.

Box to Use:
BOX is the gadget which you can connect all phone to computer through Cable.
Sarasoft Twister/ Tornado

There lots of gadget to use it depends on you what choice you made.
below is the list of common gadget to use.
Jaf
Turbo Flasher
GTS box
Ubox
Power Flasher
and many more..
Each Box are have some different special feature.

Read more »

SOLDERING LED

Led is the tiny stick like copper to join parts by soldering it using soldering station

Through-hole LEDs (that is LEDs with leads that pass through the circuit board) are generally easier to work with than surface mount LEDs (which sit on the surface of the board). Leaded solder is always much easier to work with than lead-free solder, but requires extra care due to potential health hazards. Also, one of the most important aspects of hand soldering is to use the correct size of tip, and keep it clean. The soldering tip width should be about as wide as the pads on the circuit board. Don't use a surface mount soldering tip is you plan on soldering through-hole LEDs, and likewise, don't use a soldering gun designed for house plumbing, to solder components on circuit boards. Be sure to wet your soldering sponge and wipe your iron tip each time you remove it from the stand.

Read more »

FLUX SOLUTION

This flux is sticky paste that contain liquid to prevent the heat or controlling heat from Hot air machine to remove or replace some of IC parts.. other uses of this item is to reactive some of Weak IC.

While using this, you must wear some of mask to avoid inhaling Smoke that can cause Diseases like Cancer.

Read more »

SOLDERING STATION

Same as the hot air this Device is also the most and very important among the other, so if you really want to repair, so you must also have this one first same as hot air. even you don't have some of the tools like computer, gadget or any device, you can still repair some light damage phone like need to re-soldered some of part of the phone
SOLDERING STATION - A usually rod-shaped metal implement with a pointed or wedge-shaped tip, used in soldering metallic parts, the use of this gadget is to melt the led on cover on the feet of of some ic part.


- A tool for joining metals with solder; has a wedge-shaped metal bit, usually of copper, which is heated.
- Tool with an internal heating element used to heat surfaces being soldered to the point where the solder becomes molten. so lets try it now and be careful on the head of this device due to super heat to avoid contact on your skin it will cost much pain thank you for visiting here at my site.

Read more »

HOT AIR MACHINE

So this Device is the most and very important among the other, so if you really want to repair, so you must have this one first. even you don't have some of the tools like computer, gadget or any device, you can still repair some light damage phone like need to reheat some of IC

HOT AIR MACHINE -

is a device that contain filament inside on it's body to provide even heat together
with the air pump gives an heat air to the parts of cellphone where the defective
IC is intentionally melting in a purpose of replacing it with the new one.



This GIF image show how the hot air work, as you can see the entrance of the air flow pass through the filament  and the exit air together with the heat so that why it can melt some object. so lets try use this device and be careful due to the body are heating up so keep an eye of your hands so good luck and try it on your own risk thank you for visiting here..

Read more »